13.56Mhz RFID card reader.
1. Description:
-
- Desktop 13.56Mhz RFID card reader is easy to operate and has fast reading speed.
- Standard HID driver without the need to install devices, the tag can be read in any place where information can be entered (eg Notepad, WORD text editor, browser…) , this function is suitable for setup on software without additional installation.
- With a compact, waterproof design, capable of reading RFID tags at 13.56Mhz frequency. The reader is powered through the USB port and communicates according to the USB standard
- 13.56Mhz RFID card reader has the function of reading and writing data to RFID card
2. Classification:
- 13.56Mhz RFID reader with many standards:
- 13.56Mhz USB RFID reader
- 13.56Mhz RS232 RFID reader
- 13.56Mhz RJ45 RFID reader
3. Application:
- Widely applied in apartments
- Smart parking system.
- Door system.
- And many other management systems
4. Instructions for use:
- Step 1 :Power the RFID reader as shown below, the LED light turns red after powering. Buzzer makes a sound.
- Step 2 :Open an editor like word, notepad…
- Step 3 :Use 13.56Mhz z(ID) RFID tags Move to the card reading position on the reader, the distance from the reader to the card should be less than 10cm. As a result, the LED will light up blue and the buzzer will make a sound. At the same time, the editor will print the code of the scanned card.
5. Product Images:
