RFID technology has been and is being widely applied in most areas of life, with notable examples such as warehouse management, library operations management, and the healthcare sector. Accordingly, cloning an RFID tag can bring many practical benefits, helping you avoid interruptions in using services or accessing areas that require a card, such as elevator cards, apartment access cards, hotel room key cards, etc. In the following article, IT Nam Viet will guide you on how to copy an RFID tag in a simple and cost-effective way.
how to copy an RFID tag
RFID Card Cloning Technology
RFID card cloning technology, also known as RFID card duplication, is the process of replicating an existing RFID card to create a new card with identical functionality to the original. Simply put, cloning an RFID card is like photocopying a document—the copy is identical to the original and can be used for the same purposes.
Currently, people commonly clone two types of RFID cards: the 125kHz RFID card and the 13.56MHz RFID card. Please note that NOT all RFID cards can be cloned, as some are equipped with advanced security features to prevent unauthorized duplication. It is important to understand that, without access rights or permission from the RFID card owner, any attempt to clone an RFID card is illegal.
Guide to the Simplest Way to Copy an RFID Card
To clone an RFID card, you will need to prepare the following equipment:
Original RFID card: The RFID card currently being used in the system, typically a card with a frequency of 125kHz or 13.56MHz.
A specialized RFID card cloning device: There are many RFID tag cloning devices available on the market. You should research and check which card standards the device supports for cloning.
Blank cards: Blank RFID cards to copy the data onto, usually T5577 chip cards, which come in various forms such as blank cards, key fobs, etc.
IT Nam Viet specializes in providing a wide variety of RFID cards. You can refer to our selection here:
Guide to Copying an RFID Card Using the 300-CD Machine
Below is a guide on how to properly clone an RFID card using the 300-CD machine. Follow along!
Step 1: Turn on the 300-CD machine, then place the original RFID card on the back of the machine—where the ID data is read and retrieved.
Step 2: Press “READ” until the screen displays the message, “Read success! Please replace the copy card and press the write button to write the card!” This means the machine has successfully read the card.
Step 3: Place the blank card in the same position at the back of the machine (as in Step 1). Then press “WRITE” to start copying the data. Wait a few seconds until the machine displays “Write the card successfully!”—indicating that you have successfully cloned the RFID card. You can now use the cloned card for the same purpose as the original.
Thus, with just 3 simple steps using the specialized RFID cloning machine 300-CD, you can successfully copy an RFID card, optimizing costs effectively.
How to copy RFID card with 300-CD
Guide to Copying an RFID Card Using the XZCOPY3 Machine
The process of cloning an RFID card using the XZCOPY3 machine is as follows:
Step 1: Turn on the machine and press the “CARD” button to initiate card reading mode.
Step 2: Place the original card to be cloned at the back of the XZCOPY3 machine. Then press the “READ” button and wait about 3 seconds for the machine to read the card and display the card code for copying.
Step 3: Place the blank card to be cloned at the back of the machine and press the “WRITE” button. Wait for about 2 seconds. When the screen displays “Write card success!”, it means you have successfully cloned the RFID card.
How To Copy Rfid Card With Xzcopy3
How to Copy an RFID Card Using a Handheld RFID Machine
The process is as follows:
Step 1: Turn on the mini RFID machine, then place the original card on the left side of the machine.
Step 2: Press “READ” until the “PASS” button lights up green, indicating that the card code has been successfully copied to the memory.
Step 3: Place the blank card on the left side of the machine, press “WRITE,” and when the yellow light turns on, wait until the screen turns green with the message “PASS.” This means you have successfully cloned the RFID card.
How To Copy Rfid Card With Rfid Mini
Applications of RFID Card Cloning
Currently, RFID card cloning technology is widely applied and can be used for creating elevator cards, motorcycle key locks, office door locks, hotel room keys, game cards, loyalty cards, membership cards, parking lot cards, etc. By utilizing RFID card cloning technology, significant cost savings and high convenience can be achieved.
Important Notes When Copying RFID Cards
In reality, cloning RFID cards can offer many conveniences, but it also carries certain risks, especially concerning information security. Therefore, when cloning RFID cards, you should keep the following key points in mind:
Clone RFID cards only for the right purpose. DO NOT clone RFID cards with malicious intent, such as unauthorized access to restricted areas or engaging in illegal activities.
If you want to copy someone else’s RFID card, you MUST have the owner’s consent.
Research and choose a reputable RFID card cloning service provider that guarantees absolute information security.
Only provide the necessary information for cloning the RFID card. DO NOT provide unnecessary personal information.
Identify the frequency and type of card to ensure that your RFID card can be cloned smoothly and is compatible with the cloning device.
DO NOT use cloned cards to harm others, the community, or for any illegal activities.
RFID Card Anti-Cloning Solutions
As mentioned, many individuals have exploited RFID card cloning to engage in illegal activities, affecting others and the community. Therefore, with over 10 years of experience in RFID card distribution and providing comprehensive RFID solutions for businesses, IT Nam Viet would like to offer the following optimal tips for preventing RFID card cloning:
Writing a Password on Chip-Enabled Cards
Cards operating at a frequency of 13.56MHz can read and write data. Accordingly, each type of smart card is equipped with different security features such as data encryption, allowing it to be read by only one specific reader. To enhance card security, you can apply a method of writing a password onto the card.
Purchasing High-Security Cards
Users should prioritize using cards or systems with strong security, such as high-frequency cards like 13.56MHz or UHF, making the cloning process more difficult. Of course, investing in high-security cards will increase costs.
This technology allows users to use smartphones as a universal key to access control systems such as entry control, time attendance systems, elevators, parking lots, restricted areas, etc. By embedding card information and personal data onto smartphones using NFC and Bluetooth communication technology, security is significantly enhanced. Instead of using traditional physical cards, all your access becomes simpler and more time-efficient.
Mobile Access Solution Application
IT Nam Viet – Trusted Provider of RFID Technology Solutions in Vietnam
IT Nam Viet is proud to be recognized as one of the pioneering companies in providing comprehensive RFID solutions in Vietnam. With over 10 years of experience, we have partnered with hundreds of clients, including businesses, organizations, and agencies across the country. IT Nam Viet specializes in offering a wide range of products such as RFID cards, RFID readers, barcode label printers, barcode scanners, and more from world-renowned brands.
At IT Nam Viet, customers will receive consultation and support to find RFID technology solutions tailored to their specific needs and purposes. With a team of experienced engineers and experts with deep knowledge in RFID and barcode technology, IT Nam Viet is committed to providing absolute customer satisfaction, offering optimal technology solutions at the most reasonable cost.
Above is the detailed guide on how to technically copy an RFID card that you can refer to. If you are in need of RFID or barcode technology solutions, don’t hesitate to contact us via Hotline (+84) 962.888.179 for free, quick, and effective consultation and support. Thank you for following along, and be sure to regularly update yourself with useful RFID-related information on this website!
Tiếng Việt
